Business Process Reengineering In Library Book Lending System

Mutiara Tsani; Adiva  Nur Aulia; Ilyas  Nuryasin

doi:10.35877/454RI.jinav1841

Mutiara Tsani Faculty of Engineering, Informatics, University of Muhammadiyah Malang, Malang, Indonesia (ID)
Adiva Nur Aulia Faculty of Engineering, Informatics, University of Muhammadiyah Malang, Malang (ID)
Ilyas Nuryasin Faculty of Engineering, Informatics, University of Muhammadiyah Malang, Malang (ID)

https://doi.org/10.35877/454RI.jinav1841

Keywords: business process reengineering; throughput efficiency test; BPR; ASME; BPMN

Viewed = 0 time(s)

Abstract

The development of information technology is in line with the development of internet use in Indonesia, so that organizations that are unable to adapt to information technology and the internet will find it difficult to develop in the face of today's global competition. Computerized data processing contributes greatly when compared to manual data processing. SMA Muhammadiyah 2 has a library which is still relatively new and not many books. This is very inefficient, because in addition to wasting paper, data is inaccurate, filing becomes unorganized and messy. One way to increase effectiveness and efficiency is to use Business Process Reengineering (BPR) methods to improve old business processes. These stages consist of data collection, business process analysis, business process throughput efficiency test, process redesign refinement, process redesign recommendation, throughput efficiency test business process recommendation, comparison of throughput efficiency test results, solutions. The results obtained from this study are 2 the main processes studied are the process of borrowing books and the process of returning books, which are old processes that have efficiency values of 46% and 35%. However, after re-engineering the business processes of the two processes it was able to reach 100%, which found 5 processes that were eliminated and 5 processes that were automated online.

Author Biographies

Adiva Nur Aulia, Faculty of Engineering, Informatics, University of Muhammadiyah Malang, Malang

Faculty of Engineering, Informatics, University of Muhammadiyah Malang, Malang

Ilyas Nuryasin, Faculty of Engineering, Informatics, University of Muhammadiyah Malang, Malang

Faculty of Engineering, Informatics, University of Muhammadiyah Malang, Malang

References

Aagesen, G., & Krogstie, J. (2015). Bpmn 2.0 for modeling business processes. In Handbook on Business Process Management 1: Introduction, Methods, and Information Systems. https://doi.org/10.1007/978-3-642-45100-3_10
Agustin, F. (2015). BUSSINESS PROCESS REENGINEERING SISTEM PRESENSI MAHASISWA BERBASIS WAKTU SECARA PAPERLESS (STUDY KASUS : STMIK POTENSI UTAMA). CSRID (Computer Science Research and Its Development Journal), 6(3). https://doi.org/10.22303/csrid.6.3.2014.159-170
Effendi, D., & Noviansyah, B. (2018). RANCANG BANGUN SISTEM INFORMASI MANAJEMEN PERSEDIAAN BARANG DI SUHUF KERTASENI NUSANTARA BANDUNG. JIPI (Jurnal Ilmiah Penelitian Dan Pembelajaran Informatika), 3(1). https://doi.org/10.29100/jipi.v3i1.584
Fikry, M. D., Studi, P., Informasi, S., Sains, F., Teknologi, D. A. N., Islam, U., Sunan, N., & Surabaya, A. (2021). Implementasi Business Process Reengineering Untuk Meminimalisir Keluhan Pelanggan. 23.
Islahudin, M. A., & Hadikurniawati, W. (2022). Implementasi Metode Business Process Reengineering (BPR) Pada Sistem Pelayanan Data Penduduk. Jurnal Ilmiah Informatika, 10(1), 25–34. https://doi.org/10.33884/jif.v10i01.4598
Ismanto, I., Hidayah, F., & Charisma, K. (2020). Pemodelan Proses Bisnis Menggunakan Business Process Modelling Notation (BPMN) (Studi Kasus Unit Penelitian Dan Pengabdian Kepada Masyarakat (P2KM) Akademi Komunitas Negeri Putra Sang Fajar Blitar). Briliant: Jurnal Riset Dan Konseptual, 5(1). https://doi.org/10.28926/briliant.v5i1.430
Karina, Y. T., & Kusuma, W. A. (2018). EVALUASI KUALITAS LAYANAN WEBSITE SIMANTA PKN UNIVERSITAS MUHAMMADIYAH MALANG DENGAN PENDEKATAN WEBQUAL 4.0 DAN ANALISIS IPA. Teknika: Engineering and Sains Journal, 2(1). https://doi.org/10.51804/tesj.v2i1.222.11-16
Perdanakusuma, A. R., Rachmadi, A., Muhammad, M. G., Ramadhan, D. R., & Ubaidillah, I. M. (2020). Pemodelan Proses Bisnis Pelayanan Aduan Publik padaDinas Komunikasi dan InformatikaKabupaten Mojokerto dengan Menggunakan BusinessProcess Model Notation (BPMN). Jurnal Tecnoscienza, 5(1).
Rahadian, G., Rohanda, R., & Anwar, R. K. (2014). PERANAN PERPUSTAKAAN SEKOLAH DALAM MENINGKATKAN BUDAYA GEMAR MEMBACA. Jurnal Kajian Informasi Dan Perpustakaan, 2(1). https://doi.org/10.24198/jkip.v2i1.11628
Siboro, S. M., & Gantini, T. (2022). Rekayasa Ulang Proses Bisnis Sistem Akademik di Universitas X. 4, 11–21.
Suharso, W., & Arya, D. A. P. (2018). Rekayasa Ulang Sistem Permintaan Informasi Pada Kejaksaan Negeri Batu. In Jurnal Instek (Vol. 3, Issue 2).
Suharso, W., Arya, D., Muallim, P., Ardiansyah, F., & Cahyono, F. T. (2018). Pengukuran Efisiensi Throughput pada Proses Pengaduan Pelanggan. Seminar Nasional Teknologi Dan Rekayasa (SENTRA), 166–171.
Syuhada, W. (2020). Analisis Penerapan Model Kaizen Dan Rekayasa Ulang Bisnis Untuk Meningkatkan Kinerja. Pelita Ilmu, 14(2), 81–87.
Tri Widiastuti. (2022). Rekayasa Ulang Proses Bisnis Dalam Pelaksanaan Ujian Menggunakan Sistem E-Learning (Studi Kasus FISIP Unjani). SATIN - Sains Dan Teknologi Informasi, 8(1), 129–137. https://doi.org/10.33372/stn.v8i1.841
Waluyo, M. N., Suhendar, E., & Suprapto, H. A. (2021). Rancang Ulang Proses Bisnis Dengan Metode Business Process Reengineering Pada TLS Cargo. CSRID (Computer Science Research and Its Development Journal), 12(3). https://doi.org/10.22303/csrid.12.3.2020.161-169
Wimpertiwi, D., Sasongko, A. H., & Kurniawan, A. (2014). Konsep Business Process ReenginEering untuk Memperbaiki Kinerja Bisnis Menjadi Lebih Baik: Studi Kasus Perusahaan Susu Kedelai “XYZ.” Binus Business Review, 5(2). https://doi.org/10.21512/bbr.v5i2.1189
Yohana, N. D., & Marisa, F. (2018). Perancangan Proses Bisnis Sistem Human Resource Management (HRM) Untuk Meningkatkan Kinerja Pegawai. J I M P - Jurnal Informatika Merdeka Pasuruan, 3(2). https://doi.org/10.37438/jimp.v3i2.168