Strand Inventory Analysis of Post Tension in PT XYZ Using Discrete-Event Simulation Method

Fakhrana Oktia Dyahnawangsari; Ratih Dyah Kusumastuti

doi:10.35877/454RI.qems2495

Fakhrana Oktia Dyahnawangsari Departement of Management, University of Indonesia, Jakarta, Indonesia (ID)
Ratih Dyah Kusumastuti Departement of Management, University of Indonesia, Jakarta, Indonesia (ID)

https://doi.org/10.35877/454RI.qems2495

Keywords: Strand, Post Tension, Inventory, Discrete-event simulation, Infastructure

Viewed = 0 time(s)

Abstract

The development of connectivity infrastructure, particularly toll roads, is planned to continue expanding and reach 3,500 km by 2030. This signifies a positive outlook for the construction industry. This research conducted to analyse the management of post tension raw materials and determine the optimal policies using the discrete-event simulation method. Simulation scenarios were developed using the Arena application, taking into consideration the demand patterns for post tension work. The validation test results confirmed the capability of the base case model in accurately representing real-world conditions. Scenario development was carried out to influence the strand inventory pattern by incorporating reorder points and adjusting order sizes. Based on the scenario analysis, the most effective approach was found to be setting a reorder point of 3 tons and an order size of 5 tons. The implementation of this analysis successfully reduced the strand inventory by 58.78%. This research enables companies to optimize their inventory, reduce costs, and enhance operational efficiency. The findings contribute to the development of strategies that support sustainable growth in connectivity infrastructure in Indonesia.

References

Altiok, Tayfur, & Benjamin, Melamed. (2020). Simulation Modeling and Analysis with Arena (Vol. 21).

Beske-Janssen, Philip, Johnson, Matthew Phillip, & Schaltegger, Stefan. (2015, September). 20 years of performance measurement in sustainable supply chain management – what has been achieved? Supply Chain Management, Vol. 20, pp. 664–680. https://doi.org/10.1108/SCM-06-2015-0216

Dadang. (2017). Keuntungan Beton Prategang dalam Infrastruktur Sipil.

Davoli, Giovanni, & Melloni, Riccardo. (2012). A proposed approach to extend the Economic Order Quantity (EOQ) model using discrete event simulation. IFIP Advances in Information and Communication Technology, 384 AICT, 45–53. https://doi.org/10.1007/978-3-642-33980-6_6

Diphohusodo, Istimawan. (1993). Struktur Beton Bertulang. Departemen Pekerjaan Umum RI.

fib bulletin 31. Post-tensioning in buildings. , International Federation for Structural Concrete Technical report § (2005).

Heizer, Jaz, & Render, Barry. (2020). Operations Management Sustainability and Supply Chain. Pearson.

Hsu, Pei Yuan, Angeloudis, Panagiotis, & Aurisicchio, Marco. (2018). Optimal logistics planning for modular construction using two-stage stochastic programming. Automation in Construction, 94(June), 47–61. https://doi.org/10.1016/j.autcon.2018.05.029

Kementerian Bidang Perekonomian. (2022). Peraturan Menteri Koordinator Bidang Perekonomian Republik Indonesia.

Kementerian Pekerjaan Umum dan Perumahan Rakyat. (2020). RENCANA STRATEGIS Tahun 2020-2024.

Law, Averill M. (2015). Simulation Modeling and Analysis, FIFTH EDITION.

Limanseto, Haryo. (2022). Memeratakan Pembangunan Ekonomi di Indonesia, Pemerintah Dorong Pengembangan PSN Prioritas di Berbagai Wilayah.

Lu, Hui, Wang, Hongwei, Xie, Yong, & Wang, Xiangyu. (2018). Study on construction material allocation policies: A simulation optimization method. Automation in Construction, 90, 201–212. https://doi.org/10.1016/j.autcon.2018.02.012

Milewski, Dariusz. (2019). Simulation as a way of optimizing a delivery size : Impact on the profitability of an enterprise. 59(131), 92–99. https://doi.org/10.17402/356

Milewski, Dariusz, & Wiśniewski, Tomasz. (2022). Regression analysis as an alternative method of determining the Economic Order Quantity and Reorder Point. Heliyon, 8(9). https://doi.org/10.1016/j.heliyon.2022.e10643

Mohammadnazari, Zahra, & Ghannadpour, Seyed Farid. (2021). Sustainable construction supply chain management with the spotlight of inventory optimization under uncertainty. In Environment, Development and Sustainability (Vol. 23). https://doi.org/10.1007/s10668-020-01095-0

Perpres. RI. No. 27. (2020). Perpres RI. No. 27 Tahun 2020 Tentang Kementerian Pekerjaan Umum Dan Perumahan Rakyat. Kemenkumham, 2012(019940).

Tumpu, Miswar, Rangan, Parea, Kristen, Universitas, & Toraja, Indonesia. (2022). STRUKTUR BETON PRATEGANG ( Teori dan Prinsip Desain ). (January).

Winter, Stefan, & Lasch, Rainer. (2016). Recommendations for supplier innovation evaluation from literature and practice. International Journal of Operations and Production Management, 36(6), 643–664. https://doi.org/10.1108/IJOPM-07-2014-0341

Xiong, Xing, Li, Yanzhi, Yang, Wenguo, & Shen, Huaxiao. (2022). Data-driven robust dual-sourcing inventory management under purchase price and demand uncertainties. Transportation Research Part E: Logistics and Transportation Review, 160. https://doi.org/10.1016/j.tre.2022.102671

Yang, Hongxiong, Chung, Jacky K. H., Chen, Yuhong, Pan, Yifan, Mei, Zhiling, & Sun, Xiongle. (2018). Ordering Strategy Analysis of Prefabricated Component Manufacturer in Construction Supply Chain. Mathematical Problems in Engineering, 2018. https://doi.org/10.1155/2018/4062871